FAG 7205-B-TVP-UA Angular Contact Bearings

R1:63.5 mm; Cap bolt, SAE grade:8; Ca:67.793 mm; Appropriate attachment bolt size G:0.625 in; Initial grease fill:365.71 g; Bearing:22316 E; PG:1/4 NPT; P150°:30.7 kN; da:80 mm; Labyrinth ring (db shaft position):LOR 84;

C:25.7 kN; L:166 mm; Designation of housing:PLE207N-; T min.:-20 °C; Dz:80 mm; H2:91.5 mm; N:14mm; C0:15.2 kN; T max.:100 °C; Recommended tightening torque for set screw:11.5 Nm;

Dimension C:2.559 in; Cr - Dynamic Load Rating:31024 lbf; Bearing Type:Split Cylindrical Ex; Seal Type1:Kevlar Packing Seal; Series Type:Light Series; Cor - Static Load Rating:36194 lbf; Dimension L:5.1 in; Maximum Speed:3310 rpm; Note:This product line wa; Dimension H:3.6 in;

Labyrinth ring:2 x LOR 187; A2:149.225 mm; Ca:49.809 mm; Stabilizing ring:SR-18-15; Pa:10.9 kN; P60°:141 kN; Mass pillow block:31.3 kg; Cap bolt recommended tightening torque:149.1 N·m; R1:60.325 mm; Adapter sleeve assembly:SNW 18x3.1/4;

Radius Rs min:1.000 mm; Weight:0.08 Kg; Features:Snap Ring; Oil Reference Speed:24000 rpm; Snap Ring Width f max:1.120 mm; Bore Size d:15 mm; Outside Diameter D:42.000 mm; Clearance:C3; Grease Reference Speed:16000 rpm; Outside Ring Width B:13.000 mm;

Min operating temperature, Tmin:-40 °C; a:17.5 mm; db min:55.5 mm; Inventory:6.0; Characteristic inner ring frequency, BPFI:13.3 Hz; Rating life coefficient, A2:1; Da min:72 mm; Minimum Buy Quantity:N/A; e:0.42; Manufacturer Name:NTN;

G:R1/8"; B:22 mm; S:6 mm; N:11,5mm; A1:10 mm; Recommended tightening torque for set screw:3.2 Nm; C:9.55 kN; Designation of bearing:US203-11G2; C0:4.78 kN; T max.:100 °C;

Support Type:Two-Bolt Plummer Blo; Dimension H2:180 mm; Bolt Size:2 x M16; Dimension H:80 mm; Bearing Number:LSM60BX; Cr - Dynamic Load Rating:23155 lbf; Series Type:Light Series; Housing Width:4.0 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Bearing Type:Split Cylindrical Ex;

Dimension D Max:14.50 in; Dimension A:4.92 in; C - Dynamic Load (Basic):125000 lb; Dimension D Min:12.50 in; Dimension J (Bolt Size):0.875 in; Pre Install Clearance Min:0.0053 in; Float:0.083 in; Dimension C:5.71 in; Weight:74 lb; Oil Lubrication - T Seal:1700 rpm;

db - Cone Backface Backing Diameter:9.21 in; Design Units:Imperial; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:286000 lbf; C0 - Static Radial Rating:290000 lbf; C90 - Dynamic Radial Rating (90 million revolutions)5:42600 lbf; G1 - Heat Generation Factor (Roller-Raceway):912.5; d:8

C - Cup Width:20.638 mm; a - Effective Center Location3:-9.4 mm; d:23.813 mm; Aa - Cage-Cone Backface Clearance:-0.8 mm; B:23.818 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1470 lbf; db - Cone Backface Backing Diameter:32.51 mm; G2 - Heat Generation Factor (Rib-Roller End):5.9; Db -

Mass bearing unit:0.72 kg; Basic dynamic load rating C:25.5 kN; A1:12 mm; L:125 mm; B:42.9 mm; H2:40 mm; Hexagonal key size for grub screw N:3.969 mm; d:34.925 mm; L3:63.5 mm; A5:28.2 mm;

Locking Style:Single V-Lock; Dimension P:4.75 in; Y2 - Geometry Factor:4.67; Shaft Tolerance:0.0020 in; Dimension N:3.55 in; Dimension A:3.00 in; Shaft Size Type:Metric; Float:0.08 in; Grease Lubrication - M/N Seal:1500 rpm; Dimension C:1.00 in;

Product Group:B04144; B:19 mm; F:40.5 mm; da max:40 mm; da min:36.5 mm; rs min:1.1 mm; Da max:65.5 mm; D:72 mm; Characteristic inner ring frequency, BPFI:7.28 Hz; Mass (without HJ ring):0.36 kg;

Y1:2.35; D1:239.8 mm; Radial clearance class:C4; Number of lubrication holes:3; Mass:20.12 kg; Static load, C0:1,580 kN; e:0.29; Characteristic outer ring frequency, BPF0:9.11 Hz; b:13.7 mm; da min:172 mm;